X射线聚焦望远镜镜片装配一体化建模和仿真
作者:
作者单位:

1.同济大学 数学科学学院,上海 200092;2.同济大学 交通运输工程学院,上海 200092;3.同济大学 经济与管理学院,上海 200092

作者简介:

郝朝洋(1984—),女,讲师,理学博士,主要研究方向为偏微分方程。 E-mail: haochaoyang@tongji.edu.cn

通讯作者:

关晓飞(1980—),男,副教授,博士生导师,理学博士,主要研究方向为多尺度分析。

基金项目:

中央高校基本科研业务费专项资金(22120180529);国家自然科学基金(11301392);上海市高峰高原学科计划(I类);同济大学创新创业优质课程(2940104017);同济大学本科交叉课程建设(1390104120);国家大学生创新实验计划


Integrated Modeling and Simulation of X-Ray Focusing Telescope in Mounting Process
Author:
Affiliation:

1.School of Mathematical Sciences, Tongji University, Shanghai 200092, China;2.School of Transportation Engineering, Tongji University, Shanghai 200092, China;3.School of Economics and Management,Tongji University,Shanghai 200092,China

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    针对圆锥嵌套式Wolter?I型X射线聚焦望远镜镜片装配过程,基于Abaqus有限元软件建立了三维自适应一体化建模和仿真算法流程。利用Python语言结合Abaqus脚本接口进行二次开发,提出自适应建模仿真算法,并可精确获取不同工况下镜片的应力分布、面形偏差分布等结果。同时,在此基础上进行图形用户界面(GUI)二次开发,形成了可操作性更好的插件,大大提高了仿真效率和精度,节约了实验和人工成本。仿真结果给出了理想的镜片厚度及最佳装配载荷,并给出了更合理的面形偏差的评估方法,为光路分析以及指导实际装配过程提供了重要的理论依据。

    Abstract:

    In this paper, based on finite element software Abaqus, a three-dimensional adaptive integrated modeling and simulation algorithm is established for the mirror assembly process of a conical nested Wolter-I X-ray focusing telescope. First, using Python language combined with Abaqus script interface for secondary development, an adaptive modeling simulation algorithm is proposed, and the stress distribution and surface deviation distribution of the mirror under different working conditions is accurately obtained. Then, the graphical user interface (GUI) is developed to build a more operability plug-in, which greatly improves the simulation efficiency and accuracy, and saves experimental and labor costs. The results give the ideal mirror thickness and optimal assembly load. Finally, a more reasonable evaluation method of surface deviation is obtained, which provides an important theoretical basis for optical path analysis and guidance for the actual assembly process.

    参考文献
    相似文献
    引证文献
引用本文

郝朝洋,邱树涵,潘文婷,李芬,颜远,关晓飞. X射线聚焦望远镜镜片装配一体化建模和仿真[J].同济大学学报(自然科学版),2020,48(4):602~609

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
历史
  • 收稿日期:2019-06-20
  • 最后修改日期:2020-02-18
  • 录用日期:2019-10-15
  • 在线发布日期: 2020-04-24