基于计算流体力学的循环圆设计参数对液力变矩器的性能影响预测
作者:
作者单位:

1.同济大学 汽车学院,上海 201804;2.东京大学 生产技术研究所,东京 153‒8505

作者简介:

吴光强(1965―),男,教授,博士生导师,工学博士,主要研究方向为车辆现代化设计理论及方法、车辆动力学及其控制。E-mail: wuguangqiang@tongji.edu.cn

通讯作者:

陈 洁(1988―),男,博士生,主要研究方向为乘用车液力变矩器设计理论及改型、优化方法。E-mail: chenguangjie88@163.com

基金项目:

国家自然科学基金(51575393)


Prediction of the Influence of Circulation Circle Design Parameters on the Performance of Torque Converter Based on Computational Fluid Dynamics
Author:
Affiliation:

1.College of Automotive Studies, Tongji University, Shanghai 201804, China;2.Institute of Industrial Science, The University of Tokyo, Tokyo 153-8505, Japan

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    为了提高改型设计效率,建立了液力变矩器参数化流道模型并进行三维流场仿真计算,与试验数据对比结果验证了参数化模型的可靠性。在此基础上,分别研究了相对截面积、扁平率、循环圆径向比和进出口半径等循环圆设计参数对液力变矩器性能的影响,并对比分析了各设计参数对液力性能的影响程度。结果表明,相对截面积对失速泵轮能容系数影响最大,但对失速变矩比和最大效率影响最小;扁平率、泵轮出口半径和导轮进出口半径对失速变矩比均有较大影响;而泵轮出口半径对最大效率影响最大。研究结果为液力变矩器的优化设计提供了理论参考。

    Abstract:

    In order to improve the efficiency of retrofit design, the parametric flow channel model of a torque converter was established and three-dimensional flow field simulation calculation was also carried out. The reliability of the parametric model was verified by comparing simulation results with the experimental data. On this basis, the influence of torus design parameters, such as relative section area, flatness ratio, the radial ratio of torus and the radius of inlet and outlet, on the performance of the torque converter was studied respectively, and the influence degree of each design parameter on the performance of the torque converter was compared and analyzed. The results show that relative section area has the greatest influence on the stall capacity factor of pump, but has the least influence on stall torque ratio and maximum efficiency; flatness ratio, pump outlet radius and the radius of stator inlet and outlet all have great influence on stall torque ratio, while pump outlet radius has the greatest influence on maximum efficiency. The results provide a theoretical reference for the optimal design of a torque converter.

    参考文献
    相似文献
    引证文献
引用本文

吴光强,陈洁.基于计算流体力学的循环圆设计参数对液力变矩器的性能影响预测[J].同济大学学报(自然科学版),2020,48(7):1040~1048

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
历史
  • 收稿日期:2019-09-11
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2020-08-04